Serving the Trucking & Construction Industry "Since 1976".

Become a fan of Hoesli Diesel on Facebook. Check back for special offers for fans.

Checkout Hoesli Diesel in the May 2010 issue of Diesel Power Magazine!

12 1/4" Clutch Kits for 1989-2005 Dodge with 5-speed transmission

MU-0090-RALLY 350hp-700ft/lbs (not recommended for heavy towing)

This Dyna Max kit features an organic friction material comprised of 808 composite, resulting in a significantly reduced operating temperature which gives this kit ultra-smooth engagement & extended life. This kit will hold up to 350 horsepower & 700 ft. lbs. of torque. Years 1989-2003, 5 speed & 6 speed non-ETH.

MU-0090-CONO 400HP-900FT/LBS (not recommended for heavy towing)

This Dyna Max kit features an organic lining with marcelled fins. This pressure plate has been modified for higher plate load and smoothness of engagement. This kit will hold up to 400 horsepower & 900 ft. lbs. of torque. Years 1989-2003, 5 speed & 6 speed non-ETH.

13" Upgraded Clutch Kits for 1989-2005 Dodge with 5-speed transmission & 1999-2000.5 6-speed transmission without HO engine

MU-13-1.25-CONO 350hp-750ft/lbs

This Dyna Max kit features a performance organic lining on a marcelled fin. The pressure plate is modified for higher plate load and smoothness of engagement. This clutch was designed to cure premature disk failure due to high horse power and heavy hauling in the 5 speed and early 6 speed non-ETH 12 1/4" clutches. We have taken the 13" ETH clutch and modified it to accept the 1 1/4" input shaft. By doing this, it enabled us to offer a disk center that is 2-3 times larger and stronger then can be provided in the 12 1/4" clutch kits. This kit comes with a flywheel, re-drilled and refaced to accept the larger clutch and is rated to handle up to 350 horsepower & 750 ft. lbs. of torque. Years 1989-2003 5 speed & 6 speed non-ETH.

MU-13-1.25-CONOFE 450hp-900ft/lbs

This Dyna Max kit features a full feramic lining and an organic lining on a marcelled fin. The pressure plate is modified for higher plate load and smoothness of engagement. This clutch was designed to cure premature disk failure due to high horse power and heavy hauling in the 5 speed and early 6 speed non-ETH 12 1/4" clutches. We have taken the 13" ETH clutch and modified it to accept the 1 1/4" input shaft. By doing this, it enabled us to offer a disk center that is 2-3 times larger and stronger then can be provided in the 12 1/4" clutch kits. This kit comes with a flywheel, re-drilled and refaced to accept the larger clutch and is rated to handle up to 450 horsepower & 1000 ft. lbs. of torque. Years 1989-2003 5 speed & 6 speed non-ETH.

MU-13-1.25-CONFE 550hp-1100ft/lbs

This Dyna Max kit features a full feramic lining on a marcelled fin. The pressure plate is modified for higher plate load and smoothness of engagement. This clutch was designed to cure premature disk failure due to high horse power and heavy hauling in the 5 speed and early 6 speed non-ETH 12 1/4" clutches. We have taken the 13" ETH clutch and modified it to accept the 1 1/4" input shaft. By doing this, it enabled us to offer a disk center that is 2-3 times larger and stronger then can be provided in the 12 1/4" clutch kits. This kit comes with a flywheel, re-drilled and refaced to accept the larger clutch and is rated to handle  up to 550 horsepower & 1100 ft. lbs. of torque. Years 1989-2003 5 speed & 6 speed non-ETH.

Clutch Kits for 2000.5-2005.5 with NV5600 Transmission

MU-1947-CONO 350hp-750ft/lbs

This Dyna Max kit features a performance organic lining on a marcelled fin. The pressure plate is modified for higher plate load and smoothness of engagement. This clutch is best suited for towing purposes. This kit is rated up to 350 horsepower & 750 ft. lbs. of torque. Years 2000.5 - 2005.5 ETH with NV5600 Trans.

MU-1947-CONOFE 450hp-900ft/lbs

This Dyna Max kit features a full feramic lining and an organic lining on a marcelled fin. The pressure plate is modified for higher plate load and smoothness of engagement. This clutch is best suited for towing purposes. This kit is rated up to 450 horsepower & 1000 ft. lbs. of torque. Years 2000.5 - 2005.5 ETH with NV5600 Trans.

MU-1947-CONFE 550hp-1100ft/lbs

This Dyna Max kit features a full feramic lining on a marcelled fin. The pressure plate is modified for higher plate load and smoothness of engagement. This kit will hold 550 horsepower & 1100 ft. lbs. of torque. Years 2000.5 - 2005.5 ETH with NV5600 Trans.

Conversion Clutch Kits, Clutch Kits for the G56 Transmissions and Input Shaft Kits are also available from:

      Email:  hoedie@evansville.net

Copyright © 2004 Hoesli Diesel Service.  All rights reserved.